All Atkins Cross-Cut Saw Descriptions

Compiled by: Eric Hamilton

Updated: 2:25 AM 7/15/2026
  1. Russian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    ---- 1914Russian Pattern 14, 15, 16,and 17 Gauges 3 14 14 14
    3 1/2 14 14 14
    4 14 14 14
    4 1/2 14 14 14
    5 14 14 14
    ---- 1923Russian Pattern, Special Steel 5 3 3/4 6 1/2 17 # # 6
    1923 Table 5 1/2 3 3/4 6 3/4 16 # # 7
    6 3 3/4 6 3/4 16 # # 6
  2. Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    1 1914 Rex 4 3 1/4 6 1/4 14 17 20 3.50
    4 1/2 3 1/4 14 17 20 4
    5 3 1/4 14 17 20 4.60
    5 1/2 3 1/4 14 17 20 5.89
    6 3 1/4 7 14 17 20 6.8
    6 1/2 3 1/4 14 17 20 7.63
    7 3 1/4 14 17 20 8.04
    7 1/2 3 1/4 14 17 20 9.43
    8 3 1/4 8 1/4 14 17 20 10.15
    1 1923Rex , Silver Steel 5 3 1/8 6 3/8 15 16 20 4 3/4
    1923 Table 5 1/2 3 1/8 6 3/8 15 16 20 5 1/4
    6 3 1/8 7 14 16 20 7
  3. Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    2 1914 Rex 4 3 1/4 6 1/4 14 17 20 3.50
    4 1/2 3 1/4 14 17 20 4
    5 3 1/4 14 17 20 4.60
    5 1/2 3 1/4 14 17 20 5.89
    6 3 1/4 7 14 17 20 6.8
    6 1/2 3 1/4 14 17 20 7.63
    7 3 1/4 14 17 20 8.04
    7 1/2 3 1/4 14 17 20 9.43
    8 3 1/4 8 1/4 14 17 20 10.15
    2 1923 Rex 5 3 1/2 6 3/8 15 16 20 4 1/2
    1923 Table 5 1/2 3 1/2 6 3/8 15 16 20 5 1/4
    6 3 1/2 7 14 16 20 7
  4. Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    3 1914 Peerless, Silver Steel 4 14 17 20 4
    4 1/2 14 17 20 4.20
    5 14 17 20 4.46
    5 1/2 14 17 20 5
    6 14 17 20 6.60
    6 1/2 14 17 20 5.85
    7 14 17 20 6.15
    7 1/2 14 17 20 6.30
    8 14 17 20 6.50
    3 1923 Peerless 5 3 1/4 5 3/4 15 16 20 4 1/4
    1923 Table 5 1/2 3 1/4 5 3/4 15 16 20 5
    6 3 1/4 6 14 16 20 6
  5. Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    4 1914 Perfection, Silver Steel 4 3 6 14 17 20 3.50
    4 1/2 3 6 14 17 20 4
    5 3 6 14 17 20 4.60
    5 1/2 3 6 14 17 20 5.89
    6 3 6 14 17 20 6.8
    6 1/2 3 6 14 17 20 7.36
    7 3 6 14 17 20 8.04
    7 1/2 3 6 14 17 20 9.34
    8 3 6 14 17 20 10.15
    4 1923Perfection, Silver Steel 5 3 1/4 5 3/4 15 16 20 4 1/4
    1923 Table 5 1/2 3 1/4 5 3/4 15 16 20 5
    6 3 1/4 6 14 16 20 6
    4 1950 Perfection 5 1/2 3 1/4 5 3/4 14 17 19 5
    6 3 1/4 6 14 17 19 5 3/4
    6 1/2 3 1/4 6 1/2 14 17 19 6 3/4
    7 3 1/4 6 5/8 14 17 19 8
  6. Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    5 1914 Perfection, Silver Steel 4 3 1/4 6 1/4 14 17 20 3.50
    4 1/2 3 1/4 14 17 20 4
    5 3 1/4 14 17 20 4.60
    5 1/2 3 1/4 14 17 20 5.89
    6 3 1/4 14 17 20 6.8
    6 1/2 3 1/4 14 17 20 7.36
    7 3 1/4 14 17 20 8.04
    7 1/2 3 1/4 14 17 20 9.34
    8 3 1/4 8 1/4 14 17 20 10.15
    5 1923Perfection, Silver Steel 5 3 1/8 6 3/8 15 16 20 5
    1923 Table 5 1/2 3 1/8 6 3/8 15 16 20 5 1/2
    6 3 1/8 7 14 16 20 7
    5 1950 Perfection 5 1/2 3 1/8 6 3/4 14 17 20 5 1/2
    3 1/8 3 1/8 7 14 17 20 6 1/2
  7. <td> 5 <td> 6
    Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    6 1914 Hemlock King, Silver Steel 4 14 17 20 4
    4 1/2 14 17 20 4.20
    5 14 17 20 4.46
    5 1/2 14 17 20 5
    6 14 17 20 6.60
    6 1/2 14 17 20 5.85
    7 14 17 20 6.15
    7 1/2 14 17 20 6.30
    8 14 17 20 6.50
    6 1923 Hemlock King 5 3 1/4 5 1/2 14 16 20 4 1/2
    1923 Table 5 1/2 3 1/4 5 1/2 14 16 20
    6 3 1/4 5 1/2 14 16 20
  8. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    7 1914 Auckland, Special Steel 5 2 1/8 7.76
    5 1/2 2 1/8 8.05
    6 1 2 1/8 8.40
    6 1/ 1 2 1/8 8.75
    7 1 1/8 2 1/8 9.87
    7 1/2 1 1/4 2 1/8 10.85
    8 1 3/8 2 1/8 11.69
    8 1/2 1 3/8 2 1/8 12.22
    9 1 1/2 2 1/8 14.70
    9 1/2 1 1/2 2 1/8 15.40
    10 1 1/2 2 1/8 16.10
  9. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    8 1914 Auckland, Special Steel 5 2 7.76
    5 1/2 2 8.05
    6 1 2 8.40
    6 1/ 1 2 8.75
    7 1 1/4 2 9.87
    7 1/2 1 1/4 2 10.85
    8 1 1/4 2 11.69
    8 1/2 1 1/4 2 12.22
    9 1 1/4 2 14.70
    9 1/2 1 1/4 2 15.40
    10 1 1/4 2 16.10
    8 1923Auckland, Special Steel 5 3 5/8 7 14 16 17 5
    1923 Table 5 1/2 3 5/8 7 1/4 14 16 17 5 1/2
    6 3 5/8 7 3/4 14 16 17 7
  10. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Space of teeth Space between Sections Gauge Back at Center Weight
    9 1914 Auckland Pattern, Special Steel 5 1 1/4 2 7/8 7.76
    5 1/2 1 1/4 2 7/8 8.05
    6 1 1/4 2 7/8 8.40
    6 1/ 1 1/4 2 7/8 8.75
    7 1 1/4 2 7/8 9.87
    7 1/2 1 1/4 2 7/8 10.85
    8 1 1/4 2 7/8 11.69
    8 1/2 1 1/4 2 7/8 12.22
    9 1 1/4 2 7/8 14.70
    9 1/2 1 1/4 2 7/8 15.40
    10 1 1/4 2 7/8 16.10
    9 1950 Forester 4 1/2 3 1/4 4 1/2 14 16 17 4
    5 3 1/4 4 1/2 14 16 17 4 1/4
    5 1/2 3 1/4 4 1/2 14 16 17 4 1/2
    6 3 1/4 4 1/2 14 16 17 5 1/4
  11. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Space of teeth Space between Sections Gauge Back at Center Weight
    10 1914 Auckland Pattern, Special Steel 5 1 1 1/4 7.76
    5 1/2 1 1/4 1 1/4 8.05
    6 1 1/4 1 1/4 8.40
    6 1/ 1 1/4 1 1/4 8.75
    7 1 1/4 1 1/4 9.87
    7 1/2 1 1/4 1 1/4 10.85
    8 1 1/4 1 1/4 11.69
    8 1/2 1 1/4 1 1/4 12.22
    9 1 1/4 1 1/4 14.70
    9 1/2 1 1/4 1 1/4 15.40
    10 1 1/4 1 1/4 16.10
  12. Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    11 1914 Rex Falling, breasted 2 1/8 4 3 1/4 4 1/2 14 15 16 3.25
    4 1/2 3 1/4 4 1/2 14 15 16 3.50
    5 3 1/4 4 1/2 14 15 16 3.75
    5 1/2 3 1/4 4 1/2 14 15 16 4.48
    6 3 1/4 4 1/2 14 15 16 4.95
    6 1/2 3 1/4 4 1/2 14 15 16 5.15
    7 3 1/4 4 1/2 14 15 16 5.90
    7 1/2 3 1/4 4 1/2 14 15 16 6.30
    8 3 1/4 4 1/2 14 15 16 7
    11 1923Rex Felling, Silver Steel 5 3 1/4 4 1/2 14 16 17 5
    1923 Table 5 1/2 3 1/2 4 1/2 14 16 17 4 1/2
    6 3 1/4 4 1/2 14 16 20 5 1/2
  13. Two Man Cross Cut Saws, Segment Ground, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    12 1914 Perfection, Silver Steel Falling 4 3 1/4 4 1/2 14 17 16 3.25
    4 1/2 3 1/4 4 1/2 14 17 16 3.59
    5 3 1/4 4 1/2 14 17 16 3.75
    5 1/2 3 1/4 4 1/2 14 17 16 4.48
    6 3 1/4 4 1/2 14 17 16 4.95
    6 1/2 3 1/4 4 1/2 14 17 16 5.15
    7 3 1/4 4 1/2 14 17 16 5.90
    7 1/2 3 1/4 4 1/2 14 17 16 6.30
    8 3 1/4 4 1/2 14 17 16 7
    12 1923Perfection Falling, Silver Steel 5 3 1/4 4 1/2 14 16 17 4
    1923 Table 5 1/2 3 1/4 4 1/2 14 16 17 4 3/4
    6 3 1/4 4 1/2 14 16 17 5 1/4
  14. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Space of teeth Space between Sections Gauge Back at Center Weight
    15 1914 Auckland Pattern, Special Steel 5 2 1/4 7.76
    5 1/2 2 1/4 8.05
    6 1 2 1/4 8.40
    6 1/ 1 2 1/4 8.75
    7 1 2 1/4 9.87
    7 1/2 1 2 1/4 10.85
    8 1 1/4 2 1/4 11.69
    8 1/2 1 1/4 2 1/4 12.22
    9 1 1/4 2 1/4 14.70
    9 1/2 1 1/4 2 1/4 15.40
    10 1 1/4 2 1/4 16.10
  15. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    18 1914 Dexter Silver Steel 4 14 17 16 3.15
    4 1/2 14 17 16 3.50
    5 14 17 16 4.64
    5 1/2 14 17 16 5.17
    6 14 17 16 6.60
    6 1/2 14 17 16 7.82
    7 14 17 16 8.69
    7 1/2 14 17 16 10.04
    8 14 17 16 10.96
    18 1914 Concave Tooth Dexter Silver Steel 4 14 14 16 3.15
    4 1/2 14 14 16 3.50
    5 14 14 16 4.64
    5 1/2 14 14 16 5.17
    6 14 14 16 6.60
    6 1/2 14 14 16 7.82
    7 14 14 16 8.69
    7 1/2 14 14 16 10.04
    8 14 14 16 10.96
    18 1923Dexter 14 x 16, Silver Steel 5 3 1/4 6 1/4 15 16 16 5
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 16 6
    6 3 1/2 7 14 16 16 7 1/2
  16. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    19 1914 Dexter Silver Steel 4 14 17 18 3.15
    4 1/2 14 17 18 3.50
    5 14 17 18 4.64
    5 1/2 14 17 18 5.17
    6 14 17 18 6.60
    6 1/2 14 17 18 7.82
    7 14 17 18 8.69
    7 1/2 14 17 18 10.04
    8 14 17 18 10.96
    19 1914 Concave Tooth Dexter Silver Steel 4 14 14 18 3.15
    4 1/2 14 14 18 3.50
    5 14 14 18 4.64
    5 1/2 14 14 18 5.17
    6 14 14 18 6.60
    6 1/2 14 14 18 7.82
    7 14 14 18 8.69
    7 1/2 14 14 18 10.04
    8 14 14 18 10.96
    19 1923Dexter 14 x 18, Silver Steel 5 3 1/4 6 1/4 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 18 5 3/4
    6 3 1/2 7 14 16 18 7 1/4
  17. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    20 1914 Dexter Silver Steel 4 14 17 19 3.15
    4 1/2 14 17 19 3.50
    5 14 17 19 4.64
    5 1/2 14 17 19 5.17
    6 14 17 19 6.60
    6 1/2 14 17 19 7.82
    7 14 17 19 8.69
    7 1/2 14 17 19 10.04
    8 14 17 19 10.96
    20 1914 Concave Tooth Dexter Silver Steel 4 14 14 19 3.15
    4 1/2 14 14 19 3.50
    5 14 14 19 4.64
    5 1/2 14 14 19 5.17
    6 14 14 19 6.60
    6 1/2 14 14 19 7.82
    7 14 14 19 8.69
    7 1/2 14 14 19 10.04
    8 14 14 19 10.96
    20 1923Dexter 14 x 19, Silver Steel 5 3 1/4 6 1/4 15 16 19 4 1/2
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 19 5 1/2
    6 3 1/2 7 14 16 19 7
  18. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    21 1914 Silver Steel Diamond 4 14 17 16 3.15
    4 1/2 14 17 16 3.50
    5 14 17 16 4.64
    5 1/2 14 17 16 5.17
    6 14 17 16 6.60
    6 1/2 14 17 16 7.82
    7 14 17 16 8.69
    7 1/2 14 17 16 10.04
    8 14 17 16 10.96
    21 1914 Diamond Silver Steel 4 14 14 16 3.15
    4 1/2 14 14 16 3.50
    5 14 14 16 4.64
    5 1/2 14 14 16 5.17
    6 14 14 16 6.60
    6 1/2 14 14 16 7.82
    7 14 14 16 8.69
    7 1/2 14 14 16 10.04
    8 14 14 16 10.96
    21 1923Diamond, 14 x 16, Silver Steel 5 3 1/4 6 1/4 15 16 16 5
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 16 6
    6 3 1/2 7 14 16 16 7 1/2
  19. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    22 1914 Silver Steel Diamond 4 14 17 18 3.15
    4 1/2 14 17 18 3.50
    5 14 17 18 4.64
    5 1/2 14 17 18 5.17
    6 14 17 18 6.60
    6 1/2 14 17 18 7.82
    7 14 17 18 8.69
    7 1/2 14 17 18 10.04
    8 14 17 18 10.96
    22 1914 Diamond Silver Steel 4 14 14 18 3.15
    4 1/2 14 14 18 3.50
    5 14 14 18 4.64
    5 1/2 14 14 18 5.17
    6 14 14 18 6.60
    6 1/2 14 14 18 7.82
    7 14 14 18 8.69
    7 1/2 14 14 18 10.04
    8 14 14 18 10.96
    22 1923Diamond, 14 x 18, Silver Steel 5 3 1/4 6 1/4 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 18 5 3/4
    6 3 1/2 7 14 16 18 7 1/4
  20. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    41 1914 Tasmanian Pattern, Silver Steel 4 3/4 1 3/4 1 3/16 5
    4 1/2 3/4 1 3/4 1 3/16 6.1
    5 3/4 1 3/4 1 3/16 6.6
    5 1/2 3/4 1 3/4 1 3/16 7.1
    6 3/4 1 3/4 1 3/16 7.7
    6 1/2 3/4 1 3/4 1 3/16 8.26
    7 3/4 1 3/4 1 3/16 8.96
    7 1/2 3/4 1 3/4 1 3/16 10.16
    8 3/4 1 3/4 1 3/16 11.17
    41 1923Tasmanian, Silver Steel 5 3 1/4 6 1/4 15 16 17 5
    5 1/2 3 1/4 6 1/2 15 16 17 5 1/2
    6 3 1/2 7 14 16 17 7 1/4
  21. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    42 1923 S.S.Jarrah 5 15 16 18 2 1/4 6 1/4 4 3/4
    1923 Table 5 1/2 2 1/4 6 1/2 15 16 18 5 1/4
    6 2 1/2 7 14 16 18 7 1/4
  22. Two Man Cross Cut Saws
    No Catalog Name Length feet Width Gullet Width Point to Point Weight
    42 1914 Tasmanian Pattern, Silver Steel 4 3/4 1 3/4 1 3/16 5
    4 1/2 3/4 1 3/4 1 3/16 6.1
    5 3/4 1 3/4 1 3/16 6.6
    5 1/2 3/4 1 3/4 1 3/16 7.1
    6 3/4 1 3/4 1 3/16 7.7
    6 1/2 3/4 1 3/4 1 3/16 8.26
    7 3/4 1 3/4 1 3/16 8.96
    7 1/2 3/4 1 3/4 1 3/16 10.16
    8 3/4 1 3/4 1 3/16 11.17
  23. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Space of teeth Space between Sections Gauge Back at Center Weight
    46 1914 Auckland, Silver Steel 5 2 1/8 7.76
    5 1/2 2 1/8 8.05
    6 1 2 1/8 8.40
    6 1/ 1 2 1/8 8.75
    7 1 1/4 2 1/8 9.87
    7 1/2 1 1/4 2 1/8 10.85
    8 1 3/8 2 1/8 11.69
    8 1/2 1 3/8 2 1/8 12.22
    9 1 1/2 2 1/8 14.70
    9 1/2 1 1/2 2 1/8 15.40
    10 1 1/2 2 1/8 16.10
  24. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Space of teeth Space between Sections Gauge Back at Center Weight
    47 1914 Auckland, Silver Steel 5 2 7.76
    5 1/2 2 8.05
    6 1 2 8.40
    6 1/ 1 2 8.75
    7 1 1/4 2 9.87
    7 1/2 1 1/4 2 10.85
    8 1 1/4 2 11.69
    8 1/2 1 1/4 2 12.22
    9 1 1/4 2 14.70
    9 1/2 1 1/4 2 15.40
    10 1 1/4 2 16.10
  25. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Space of teeth Space between Sections Gauge Back at Center Weight
    48 1914 Auckland Pattern, Silver Steel 5 1 1/4 2 7/8 7.76
    5 1/2 1 1/4 2 7/8 8.05
    6 1 1/4 2 7/8 8.40
    6 1/ 1 1/4 2 7/8 8.75
    7 1 1/4 2 7/8 9.87
    7 1/2 1 1/4 2 7/8 10.85
    8 1 1/4 2 7/8 11.69
    8 1/2 1 1/4 2 7/8 12.22
    9 1 1/4 2 7/8 14.70
    9 1/2 1 1/4 2 7/8 15.40
    10 1 1/4 2 7/8 16.10
  26. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Space of teeth Space between Sections Gauge Back at Center Weight
    49 1914 Auckland Pattern, Silver Steel 5 1 1 1/4 7.76
    5 1/2 1 1/4 1 1/4 8.05
    6 1 1/4 1 1/4 8.40
    6 1/ 1 1/4 1 1/4 8.75
    7 1 1/4 1 1/4 9.87
    7 1/2 1 1/4 1 1/4 10.85
    8 1 1/4 1 1/4 11.69
    8 1/2 1 1/4 1 1/4 12.22
    9 1 1/4 1 1/4 14.70
    9 1/2 1 1/4 1 1/4 15.40
    10 1 1/4 1 1/4 16.10
  27. Australasian Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Space of teeth Space between Sections Gauge Back at Center Weight
    50 1914 Auckland Pattern, Silver Steel 5 2 1/4 7.76
    5 1/2 2 1/4 8.05
    6 1 2 1/4 8.40
    6 1/ 1 2 1/4 8.75
    7 1 2 1/4 9.87
    7 1/2 1 2 1/4 10.85
    8 1 2 1/4 11.69
    8 1/2 1 1/4 2 1/4 12.22
    9 1 1/4 2 1/4 14.70
    9 1/2 1 1/4 2 1/4 15.40
    10 1 1/4 2 1/4 16.10
  28. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    51 1914 The Tyee, Silver Steel 6 13 13 17 9
    6 1/2 13 13 17 9.83
    7 13 13 17 11
    7 1/2 13 13 17 11.90
    8 13 13 17 12.70
    8 1/2 13 13 17 13.30
    9 13 13 17 13.90
    9 1/2 13 13 17 14.50
    10 13 13 17 15.10
    11 13 13 17 16.30
    12 13 13 17 17.50
    51 19237', 7 1/2', 8', Pacific Coast Pattern 7 4 3/8 7 1/4 13 15 17 10 1/4
    1923 Table 7 1/2 4 1/2 7 1/2 13 15 17 11 1/2
    8 4 1/2 7 1/2 13 15 17 12 3/4
    Pacific Coast Pattern, Two Man Cross Cut Saws, Segment Ground
    51 1950 Pacific Coast Bucking 5 4 6 1/16 12 15 17 6
    6 4 6 3/4 12 15 17 8
    6 1/2 4 7 3/8 12 15 17 9 1/8
    7 4 7 3/8 12 15 17 10 1/4
  29. Pacific Coast Pattern, Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    52 1914 The Howatson, Silver Steel 6 13 13 17 7
    6 1/2 13 13 17 7.78
    7 13 13 17 8.40
    7 1/2 13 13 17 8.99
    8 13 13 17 9.69
    8 1/2 13 13 17 10.68
    9 13 13 17 10.93
    9 1/2 13 13 17 11.66
    10 13 13 17 12.25
    11 13 13 17 12.80
    12 13 13 17 13.20
    52 19237', 7 1/2', 8', Pacific Coast Pattern 7 3 1/4 5 3/4 13 15 17 8
    1923 Table 7 1/2 3 1/4 5 3/4 13 15 17 9
    8 4 1/2 7 1/2 13 15 17 9 3/4
    52 1950 Pacific Coast Falling 5 1/2 3 1/4 5 13 15 17 5
    6 3 1/4 5 1/4 13 15 17 5 3/4
    6 1/2 3 1/4 5 1/4 13 15 17 6
    7 3 1/4 5 1/2 13 15 17 7
    7 1/2 3 1/4 6 3/4 13 15 17 7 3/4
    8 3 1/4 5 3/4 13 15 17 8 1/4
    10 3 1/2 5 3/4 13 15 17 10 1/2
  30. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    55 1914 Perfection, Silver Steel, 14 x 18 4 14 14 18 2.88
    4 1/2 14 14 18 3.24
    5 14 14 18 3.60
    5 1/2 14 14 18 3.96
    6 14 14 18 4.32
    6 1/2 14 14 18 4.68
    7 14 14 18 5.94
    7 1/2 14 14 18 5.40
    8 14 14 18 5.76
    55 1950 Four Cutter 5 1/2 3 1/8 6 14 16 19 4 3/4
    6 3 1/8 6 1/4 14 16 19 5 1/2
  31. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    64 1914 Redwood King, Standard, Silver Steel, 13 gauge 6 4 9/16 7 1 3/4 13 13 7.90
    6 1/2 4 9/16 7 1 3/4 13 13 8.40
    7 4 9/16 7 1 3/4 13 13 8.90
    7 1/2 4 9/16 7 1 3/4 13 13 10.49
    8 4 9/16 7 1 3/4 13 13 10.80
    8 1/2 4 9/16 7 1 3/4 13 13 11.40
    9 4 9/16 7 1 3/4 13 13 11.90
    9 1/2 4 9/16 7 1 3/4 13 13 12.40
    10 4 9/16 7 1 3/4 13 13 12.90
    11 4 9/16 7 1 3/4 13 13 13.90
    12 4 9/16 7 1 3/4 13 13 16.90
    14 4 9/16 7 1 3/4 13 13 18.90
    16 4 9/16 7 1 3/4 13 13 18.90
    18 4 9/16 7 1 3/4 13 13 20.90
    20 4 9/16 7 1 3/4 13 13 22.90
    64 1914 Redwood King, Silver Steel, 11 gauge 6 4 9/16 7 1 3/4 11 11 8.46
    6 1/2 4 9/16 7 1 3/4 11 11 9.26
    7 4 9/16 7 1 3/4 11 11 11.57
    7 1/2 4 9/16 7 1 3/4 11 11 12.91
    8 4 9/16 7 1 3/4 11 11 13.58
    8 1/2 4 9/16 7 1 3/4 11 11 14.25
    9 4 9/16 7 1 3/4 11 11 14.92
    9 1/2 4 9/16 7 1 3/4 11 11 19.59
    10 4 9/16 7 1 3/4 11 11 16.26
    11 4 9/16 7 1 3/4 11 11 17.60
    12 4 9/16 7 1 3/4 11 11 18.94
    14 4 9/16 7 1 3/4 11 11 21.62
    16 4 9/16 7 1 3/4 11 11 24.30
    18 4 9/16 7 1 3/4 11 11 26.98
    20 4 9/16 7 1 3/4 11 11 29.66
    64 1923Redwood King, 7', 7 1/2', 8' 7 4 1/2 7 11 14 16 10 1/2
    1923 Table 7 1/2 4 1/2 7 11 14 16 12
    8 4 9/16 7 1/2 11 14 16 13
  32. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    65 1914 Redwood King, Silver Steel, 10 gauge 6 4 9/16 7 1 3/4 10 10 11.80
    6 1/2 4 9/16 7 1 3/4 10 10 12.20
    7 4 9/16 7 1 3/4 10 10 12.66
    7 1/2 4 9/16 7 1 3/4 10 10 14
    8 4 9/16 7 1 3/4 10 10 14.42
    8 1/2 4 9/16 7 1 3/4 10 10 14.84
    9 4 9/16 7 1 3/4 10 10 15.26
    9 1/2 4 9/16 7 1 3/4 10 10 15.68
    10 4 9/16 7 1 3/4 10 10 16.10
    11 4 9/16 7 1 3/4 10 10 19.94
    12 4 9/16 7 1 3/4 10 10 17.78
    14 4 9/16 7 1 3/4 10 10 19.46
    16 4 9/16 7 1 3/4 10 10 21.14
    18 4 9/16 7 1 3/4 10 10 22.82
    20 4 9/16 7 1 3/4 10 10 24.50
    65 1923 Redwood King, 7', 7 1/2', 8' 7 4 1/2 7 12 10 15 13
    1923 Table 7 1/2 4 1/2 7 10 13 15 15
    8 4 9/16 7 1/2 10 13 15 18
  33. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    66 1914 Redwood King, Silver Steel, 9 gauge 6 4 9/16 7 1 3/4 9 9 10.93
    6 1/2 4 9/16 7 1 3/4 9 9 12.42
    7 4 9/16 7 1 3/4 9 9 13.91
    7 1/2 4 9/16 7 1 3/4 9 9 15.40
    8 4 9/16 7 1 3/4 9 9 16.57
    8 1/2 4 9/16 7 1 3/4 9 9 17.74
    9 4 9/16 7 1 3/4 9 9 18.91
    9 1/2 4 9/16 7 1 3/4 9 9 20.08
    10 4 9/16 7 1 3/4 9 9 21.23
    11 4 9/16 7 1 3/4 9 9 23.59
    12 4 9/16 7 1 3/4 9 9 25.94
    14 4 9/16 7 1 3/4 9 9 27.27
    16 4 9/16 7 1 3/4 9 9 29.61
    18 4 9/16 7 1 3/4 9 9 31.95
    20 4 9/16 7 1 3/4 9 9 34.29
  34. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    67 1914 Redwood Falling, Silver Steel, 12 gauge 6 4 9/16 7 1 3/4 12 12 7
    6 1/2 4 9/16 7 1 3/4 12 12 7.78
    7 4 9/16 7 1 3/4 12 12 8.40
    7 1/2 4 9/16 7 1 3/4 12 12 8.99
    8 4 9/16 7 1 3/4 12 12 9.69
    8 1/2 4 9/16 7 1 3/4 12 12 10.68
    9 4 9/16 7 1 3/4 12 12 10.93
    9 1/2 4 9/16 7 1 3/4 12 12 11.66
    10 4 9/16 7 1 3/4 12 12 12.45
    11 4 9/16 7 1 3/4 12 12 12.80
    12 4 9/16 7 1 3/4 12 12 13.20
    67 1923Redwood Falling, 8', 10', 12' 8 3 5/8 6 12 15 17 7
    1923 Table 10 3 3/4 6 1/4 12 15 17 8 1/2
    12 4 1/8 6 5/8 12 15 17 9 1/2
  35. 7 1/4 7 1/2 7 1/2
    Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    68 1914 Eureka, Silver Steel, 13 x 17 6 4 9/16 13 13 17 9
    6 1/2 4 9/16 13 13 17 9.83
    7 4 9/16 13 13 17 11
    7 1/2 4 9/16 13 13 17 11.90
    8 4 9/16 13 13 17 12.70
    8 1/2 4 9/16 13 13 17 13.3
    9 4 9/16 13 13 17 13.9
    9 1/2 4 9/16 13 13 17 14.5
    10 4 9/16 13 13 17 15.1
    11 4 9/16 13 13 17 16.3
    12 4 9/16 13 13 17 17.5
    14 4 9/16 13 13 17 19.9
    16 4 9/16 13 13 17 22.3
    18 4 9/16 13 13 17 24.7
    20 4 9/16 13 13 17 27.1
    68 1923Eureka, 7', 7 1/2', 8' 7 17 4 3/8 12 12 15
    1923 Table 7 1/2 17 4 1/2 15 12 15
    8 17 4 1/2 18 12 15
  36. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    69 1914 Eureka Falling, Silver Steel, 13 17 6 4 9/16 13 13 17 7
    6 1/2 4 9/16 13 13 17 7.78
    7 4 9/16 13 13 17 8.40
    7 1/2 4 9/16 13 13 17 8.99
    8 4 9/16 13 13 17 9.69
    8 1/2 4 9/16 13 13 17 10.63
    9 4 9/16 13 13 17 10.93
    9 1/2 4 9/16 13 13 17 11.66
    10 4 9/16 13 13 17 12.25
    11 4 9/16 13 13 17 12.80
    12 4 9/16 13 13 17 13.80
    14 4 9/16 13 13 17 14.80
    16 4 9/16 13 13 17 16.40
    18 4 9/16 13 13 17 18
    20 4 9/16 13 13 17 19.60
    69 1923Eureka Falling, 7', 7 1/2', 8' 7 3 1/4 5 3/8 12 15 17 7 1/2
    1923 Table 7 1/2 3 1/4 5 3/4 12 15 17 8 1/2
    8 3 1/4 5 3/4 12 15 17 9 1/2
  37. Moss Back, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    72 1914Lance Tooth, not perforated, Silver Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    72 1923 Tuttle, N.P., Silver Steel 5 3 1/2 5 1/2 15 16 18 4 1/4
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 6 3/4
  38. Moss Back, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    73 1914 Lance Tooth, perforated, Silver Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    73 1923 Tuttle, Perf, Silver Steel 5 3 1/2 5 1/2 15 16 18 4 1/4
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 6 3/4
  39. Moss Back, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    76 1914 Concave Tooth Dexter perforated, Silver Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    76 1923 Dexter Silver Steel 5 3 1/2 5 1/2 15 16 18 4 1/2
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5 1/4
    6 3 3/4 6 1/4 14 16 18 7
  40. Moss Back, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    77 1914 Lance Tooth, not perforated, Silver Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    77 1923 Lance, N.P., Silver Steel 5 3 1/2 5 1/2 15 16 18 4 1/4
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 6 3/4
  41. Moss Back, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    78 1914 Lance Tooth, perforated, Silver Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    78 1923 Lance, Perf, Silver Steel 5 3 1/2 5 1/2 15 16 18 4
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 6 3/4
  42. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    218 1914 Concave Tooth Dexter Special Steel 4 14 14 16 3.15
    4 1/2 14 14 16 3.50
    5 14 14 16 4.64
    5 1/2 14 14 16 5.17
    6 14 14 16 6.60
    6 1/2 14 14 16 7.82
    7 14 14 16 8.69
    7 1/2 14 14 16 10.04
    8 14 14 16 10.96
    218 1923Dexter 14 x 16, Special Steel 5 3 1/4 7 15 16 16 5
    1923 Table 5 1/2 3 1/4 7 1/4 15 16 16 5 1/2
    6 3 5/8 7 14 16 16 7 1/2
  43. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    219 1914 Concave Tooth Dexter Special Steel 4 14 14 18 3.15
    4 1/2 14 14 18 3.50
    5 14 14 18 4.64
    5 1/2 14 14 18 5.17
    6 14 14 18 6.60
    6 1/2 14 14 18 7.82
    7 14 14 18 8.69
    7 1/2 14 14 18 10.04
    8 14 14 18 10.96
    219 1923Dexter 14 x 18, Special Steel 5 3 1/4 6 1/2 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 18 5 3/4
    6 3 1/2 7 14 16 18 7 1/4
  44. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    220 1914 Concave Tooth Dexter Special Steel 4 14 14 19 3.15
    4 1/2 14 14 19 3.50
    5 14 14 19 4.64
    5 1/2 14 14 19 5.17
    6 14 14 19 6.60
    6 1/2 14 14 19 7.82
    7 14 14 19 8.69
    7 1/2 14 14 19 10.04
    8 14 14 19 10.96
    220 1923Dexter 14 x 19, Special Steel 5 3 1/4 6 1/2 15 16 19 6
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 19 5 1/2
    6 3 1/2 7 14 16 19 7
  45. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    221 1914 Diamond, Special Steel 4 14 14 16 3.15
    4 1/2 14 14 16 3.50
    5 14 14 16 4.64
    5 1/2 14 14 16 5.17
    6 14 14 16 6.60
    6 1/2 14 14 16 7.82
    7 14 14 16 8.69
    7 1/2 14 14 16 10.04
    8 14 14 16 10.96
    221 1923Diamond, 14 x 16, Special Steel 5 3 1/4 6 1/4 15 16 16 5
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 16 6
    6 3 1/2 7 14 16 16 7 1/2
  46. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    222 1914 Diamond, Special Steel 4 14 14 18 3.15
    4 1/2 14 14 18 3.50
    5 14 14 18 4.64
    5 1/2 14 14 18 5.17
    6 14 14 18 6.60
    6 1/2 14 14 18 7.82
    7 14 14 18 8.69
    7 1/2 14 14 18 10.04
    8 14 14 18 10.96
    222 1923Diamond, 14 x 18, Special Steel 5 3 1/4 6 1/4 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 18 5 3/4
    6 3 1/2 7 14 16 18 7 1/4
  47. 3 3/4 4 1/2 5 1/2
    Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    223 1914 Lone Star, Diamond Special Steel 4 14 14 18 3.15
    4 1/2 14 14 18 3.50
    5 14 14 18 3.77
    5 1/2 14 14 18 4.06
    6 14 14 18 5.47
    6 1/2 14 14 18 5.96
    7 14 14 18 6
    7 1/2 14 14 18 7.38
    8 14 14 18 8.40
    223 1923Lone Star Diamond, Special Steel 5 3 5 14 16 18
    1923 Table 5 1/2 3 5 1/2 14 16 18
    6 3 5 3/8 14 16 18
    223 1950 Lone Star Diamond 5 1/2 3 1/4 5 3/4 14 16 18 5 1/2
    6 3 1/4 6 14 16 18 6 1/4
  48. 3 3/4 4 1/2 5 1/2
    Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    224 1914 Lone Star, Concave Tooth, Dexter Special Steel 4 14 14 18 3.15
    4 1/2 14 14 18 3.50
    5 14 14 18 3.77
    5 1/2 14 14 18 4.06
    6 14 14 18 5.47
    6 1/2 14 14 18 5.96
    7 14 14 18 6
    7 1/2 14 14 18 7.38
    8 14 14 18 8.40
    224 1923Lone Star Dexter Special Steel 5 3 5 14 16 18
    1923 Table 5 1/2 3 5 1/2 14 16 18
    6 3 5 3/8 14 16 18
    224 1950 Victor 4 1/2 3 1/4 4 1/4 14 16 17 3 1/4
    5 3 1/4 4 1/4 14 16 17 4
    5 1/2 3 1/4 4 1/4 14 16 17 4 3/4
    6 3 1/4 4 1/2 14 16 17 5 1/2
  49. 4 3/4 5 3/4 7 1/4
    Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    225 1914 Victor, perforated tooth, special steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.91
    5 14 14 18 4.55
    5 1/2 14 14 18 5.38
    6 14 14 18 6.64
    6 1/2 14 14 18 7.32
    7 14 14 18 7.81
    7 1/2 14 14 18 8.40
    8 14 14 18 9.30
    225 1923Victor, Special Steel 5 4 6 15 16 18
    1923 Table 5 1/2 4 6 1/4 15 16 18
    6 4 5 3/4 14 16 18
    225 1950 Victor 5 3 1/8 6 3/4 14 17 20 4 1/2
    5 1/2 3 1/8 6 3/4 14 16 20 5 1/4
    6 3 1/8 7 14 16 20 6
  50. Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    226 1950 Victor 5 1/2 3 1/4 5 3/4 14 16 19 5 1/4
    6 3 1/4 6 14 16 19 6
  51. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    227 1914 Lance Tooth, special steel 4 14 14 18 3.15
    4 1/2 14 14 18 3.50
    5 14 14 18 4.64
    5 1/2 14 14 18 5.17
    6 14 14 18 6.60
    6 1/2 14 14 18 7.82
    7 14 14 18 8.69
    7 1/2 14 14 18 10.04
    8 14 14 18 10.96
    227 1923Lance Tooth, Special Steel 5 3 1/4 6 1/4 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 18 5 1/2
    6 3 1/2 7 14 16 18 7
  52. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    228 1950 Victor 5 1/2 3 1/8 5 1/2 14 16 19 5
    6 3 1/8 5 3/4 14 16 19 6
  53. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    241 1914 Tasmanian Pattern, Special Steel 4 3/4 1 3/4 1 3/16 5
    4 1/2 3/4 1 3/4 1 3/16 6.1
    5 3/4 1 3/4 1 3/16 6.6
    5 1/2 3/4 1 3/4 1 3/16 7.1
    6 3/4 1 3/4 1 3/16 7.7
    6 1/2 3/4 1 3/4 1 3/16 8.26
    7 3/4 1 3/4 1 3/16 8.96
    7 1/2 3/4 1 3/4 1 3/16 10.16
    8 3/4 1 3/4 1 3/16 11.17
    241 1923Tasmanian, Special Steel 5 2 1/4 6 1/4 15 16 17 5
    1923 Table 5 1/2 2 1/4 6 1/2 15 16 17 6 1/4
    6 2 1/4 7 14 16 17 7 1/4
  54. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    242 1914 Tasmanian Pattern, Special Steel 4 3/4 1 3/4 1 3/16 5
    4 1/2 3/4 1 3/4 1 3/16 6.1
    5 3/4 1 3/4 1 3/16 6.6
    5 1/2 3/4 1 3/4 1 3/16 7.1
    6 3/4 1 3/4 1 3/16 7.7
    6 1/2 3/4 1 3/4 1 3/16 8.26
    7 3/4 1 3/4 1 3/16 8.96
    7 1/2 3/4 1 3/4 1 3/16 10.16
    8 3/4 1 3/4 1 3/16 11.17
    242 1923 Jarrah, Special Steel 5 15 16 18 2 1/4 6 1/4 4 3/4
    1923 Table 5 1/2 2 1/4 6 1/2 15 16 18 5 1/4
    6 2 1/4 7 14 16 18 7 1/4
  55. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    251 1914 The Tyee, Special Steel 6 13 13 17 9
    6 1/2 13 13 17 9.83
    7 13 13 17 11
    7 1/2 13 13 17 11.90
    8 13 13 17 12.70
    8 1/2 13 13 17 13.30
    9 13 13 17 13.90
    9 1/2 13 13 17 14.50
    10 13 13 17 15.10
    11 13 13 17 16.30
    12 13 13 17 17.50
    251 1923 ----, Pacific Coast Pattern, 7', 7 1/2', 8' 7 4 3/8 7 1/4 13 13 17 10 1/4
    1923 Table 7 1/2 4 1/2 7 1/2 13 13 17 11 1/2
    8 4 1/2 7 1/2 13 13 17 12 3/4
  56. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    252 1914 The Howatson, Special Steel 6 13 13 17 7
    6 1/2 13 13 17 7.78
    7 13 13 17 8.40
    7 1/2 13 13 17 8.99
    8 13 13 17 9.69
    8 1/2 13 13 17 10.68
    9 13 13 17 10.93
    9 1/2 13 13 17 11.66
    10 13 13 17 12.25
    11 13 13 17 12.80
    12 13 13 17 13.20
    252 1923 ----, Pacific Coast Pattern, 7', 7 1/2', 8' 7 3 1/4 5 3/4 13 13 17 8
    1923 Table 7 1/2 3 1/4 5 3/4 13 13 17 9
    8 4 1/2 7 1/2 13 13 17 9 3/4
  57. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    259 1914 Dexter Special Steel, 14 x 18 4 14 14 18 2.88
    4 1/2 14 14 18 3.24
    5 14 14 18 3.60
    5 1/2 14 14 18 3.96
    6 14 14 18 4.32
    6 1/2 14 14 18 4.68
    7 14 14 18 5.94
    7 1/2 14 14 18 5.40
    8 14 14 18 5.76
  58. Moss Back Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    272 1914 Lance Tooth, not perforated, Special Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    272 1932Tuttle, N.P., Special Steel 5 3 1/2 5 1/2 15 16 18 4 1/4
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 6 3/4
  59. Moss Back Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    273 1914 Lance Tooth, perforated, Special Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    273 1923Tuttle, Perf, Special Steel 5 3 1/2 5 1/2 15 16 18 4 1/4
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 6 3/4
  60. Moss Back Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    276 1914 Concave Tooth Dexter perforated, Special Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    276 1923Dexter Special Steel 5 3 1/2 5 1/2 15 16 18 4 1/2
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 7
  61. Moss Back Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    277 1914 Lance Tooth, not perforated, Special Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    277 1923Lance, N.P., Special Steel 5 3 1/2 5 1/2 15 16 18 4 1/4
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 6 3/4
  62. Moss Back Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    278 1914 Lance Tooth, perforated, Special Steel 4 14 14 18 3.50
    4 1/2 14 14 18 3.85
    5 14 14 18 4.20
    5 1/2 14 14 18 5.25
    6 14 14 18 6.55
    6 1/2 14 14 18 7.39
    7 14 14 18 8.15
    7 1/2 14 14 18 9.10
    8 14 14 18 9.80
    278 1923Lance, Perf, Special Steel 5 3 1/2 5 1/2 15 16 18 4
    1923 Table 5 1/2 3 5/8 5 3/4 15 16 18 5
    6 3 3/4 6 1/4 14 16 18 6 3/4
  63. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    330 1914 Tuttle Tooth, special steel 4 14 14 16 3.56
    4 1/2 14 14 16 4.30
    5 14 14 16 4.98
    5 1/2 14 14 16 5.97
    6 14 14 16 6.34
    6 1/2 14 14 16 7.65
    7 14 14 16 8.42
    7 1/2 14 14 16 9.88
    8 14 14 16 10.73
    330 1923 Tuttle, 14 x 16, Special Steel 5 3 5 3/4 15 16 16 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/4 15 16 16 6
    6 3 1/4 7 14 16 16 7 1/2
  64. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    331 1914 Tuttle Tooth, special steel 4 14 14 18 3.56
    4 1/2 14 14 18 4.30
    5 14 14 18 4.98
    5 1/2 14 14 18 5.97
    6 14 14 18 6.34
    6 1/2 14 14 18 7.65
    7 14 14 18 8.42
    7 1/2 14 14 18 9.88
    8 14 14 18 10.73
    331 1923Tuttle, 14 x 18, Special Steel 5 3 5 3/4 15 16 18 4 1/2
    1923 Table 5 1/2 3 1/4 6 1/4 15 16 18 5 1/2
    6 3 1/4 7 14 16 18 7 1/4
    331 1950 Original Tuttle 5 3 1/8 6 3/8 14 16 18 4 3/4
    5 1/2 3 1/8 6 3/8 14 16 18 6 1/4
    6 3 1/8 7 14 16 18 7
    6 1/2 3 1/8 7 1/8 14 16 18 8 1/4
  65. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    332 1914 Tuttle Tooth, special steel 4 14 14 19 3.56
    4 1/2 14 14 19 4.30
    5 14 14 19 4.98
    5 1/2 14 14 19 5.97
    6 14 14 19 6.34
    6 1/2 14 14 19 7.65
    7 14 14 19 8.42
    7 1/2 14 14 19 9.88
    8 14 14 19 10.73
    332 1923Tuttle, 14 x 19, Special Steel 5 3 5 3/4 15 16 19 4 1/4
    1923 Table 5 1/2 3 1/4 6 1/4 15 16 19 5 1/4
    6 3 1/4 7 14 16 19 7
  66. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    332 1/2 1950 Original Tuttle 5 3 1/8 6 3/8 14 16 20 4 1/4
    5 1/2 3 1/8 6 3/4 14 16 20 5 3/4
    6 3 1/8 7 14 16 20 6 1/2
  67. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    333 1914 American Tooth 4 14 14 16 3.56
    4 1/2 14 14 16 4.30
    5 14 14 16 4.98
    5 1/2 14 14 16 5.97
    6 14 14 16 6.34
    6 1/2 14 14 16 7.65
    7 14 14 16 8.42
    7 1/2 14 14 16 9.88
    8 14 14 16 10.73
    333 1914 American Tooth 4 14 14 18 3.56
    4 1/2 14 14 18 4.30
    5 14 14 18 4.98
    5 1/2 14 14 18 5.97
    6 14 14 18 6.34
    6 1/2 14 14 18 7.65
    7 14 14 18 8.42
    7 1/2 14 14 18 9.88
    8 14 14 18 10.73
    333 1923American, 14 x 16, Special Steel 5 3 5 3/4 15 16 16 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/4 15 16 16 6 1/4
    6 3 1/4 7 14 16 16 8 1/4
  68. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    334 1923American. 14 x 18, Special Steel 5 3 5 3/4 15 16 18 4 1/2
    1923 Table 5 1/2 3 1/4 6 1/4 15 16 18 6
    6 3 1/4 7 14 16 18 8
  69. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    335 1914 Hickory 4 14 14 16 3.56
    4 1/2 14 14 16 4.30
    5 14 14 16 4.98
    5 1/2 14 14 16 5.97
    6 14 14 16 6.34
    6 1/2 14 14 16 7.65
    7 14 14 16 8.42
    7 1/2 14 14 16 9.88
    8 14 14 16 10.73
    335 1923Hickory, Special Steel 5 15 16 16 3 5 3/4 5
    1923 Table 5 1/2 15 16 16 3 1/4 6 1/4 6
    6 14 16 16 3 1/4 7 8 1/4
  70. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    336 1914 Special steel 4 14 14 18 3.56
    4 1/2 14 14 18 4.30
    5 14 14 18 4.98
    5 1/2 14 14 18 5.97
    6 14 14 18 6.34
    6 1/2 14 14 18 7.65
    7 14 14 18 8.42
    7 1/2 14 14 18 9.88
    8 14 14 18 10.73
    336 1923Feather Edge, 14 x 18, Special Steel 5 3 5 3/4 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/4 15 16 18 5 3/4
    6 3 1/4 7 14 16 18 7
  71. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    337 1914 Common Tooth distances point to point 4 5/8 14 14 16 3.56
    4 1/2 5/8 14 14 16 4.30
    5 5/8 14 14 16 4.98
    5 1/2 3/4 14 14 16 5.97
    6 3/4 14 14 16 6.34
    6 1/2 1 14 14 16 7.65
    7 1 14 14 16 8.42
    7 1/2 1 1/4 14 14 16 9.88
    8 1 1/4 14 14 16 10.73
    337 1923Common, 14 x 16, Special Steel 5 3 5 3/4 15 16 16 5
    1923 Table 5 1/2 3 1/4 6 1/4 15 16 16 6
    6 3 1/4 7 14 16 16 7
    337 1950 Common 4 3 1/8 5 7/8 14 15 16 4 1/4
    4 1/2 3 1/8 6 1/4 14 15 16 4 7/8
    5 3 1/8 6 3/8 14 16 16 5 1/2
    5 1/2 3 1/8 6 3/8 14 15 16 6 1/4
    6 3 1/8 7 14 15 16 7 1/2
  72. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    338 1914 Common Tooth distances point to point 4 5/8 14 14 18 3.56
    4 1/2 5/8 14 14 18 4.30
    5 5/8 14 14 18 4.98
    5 1/2 3/4 14 14 18 5.97
    6 3/4 14 14 18 6.34
    6 1/2 1 14 14 18 7.65
    7 1 14 14 18 8.42
    7 1/2 1 1/4 14 14 18 9.88
    8 1 1/4 14 14 18 10.73
    338 1923Common, 14 x 18, Special Steel 5 3 5 3/4 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/4 15 16 18 5 3/4
    6 3 1/4 7 14 16 18 6 3/4
    338 1950 Common 4 3 1/8 5 7/8 14 16 18 4 1/4
    4 1/2 3 1/8 6 1/4 14 15 18 4 7/8
    5 3 1/8 6 3/8 14 16 18 5 1/2
    5 1/2 3 1/8 6 3/8 14 16 18 6 1/4
    6 3 1/8 7 14 16 18 7 1/2
  73. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    360 1914 Pacific Coast Pattern, Special Steel, Lance Tooth perforated, 14 x 18 4 14 14 18 2.88
    4 1/2 14 14 18 3.24
    5 14 14 18 3.60
    5 1/2 14 14 18 3.96
    6 14 14 18 4.32
    6 1/2 14 14 18 4.68
    7 14 14 18 5.94
    7 1/2 14 14 18 5.40
    8 14 14 18 5.73
  74. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    361 1914 Lance Tooth, not perforated, special steel, 14 x 18 4 14 14 18 5
    4 1/2 14 14 18 6.1
    5 14 14 18 6.6
    5 1/2 14 14 18 7.1
    6 14 14 18 7.7
    6 1/2 14 14 18 8.26
    7 14 14 18 8.96
    7 1/2 14 14 18 10.16
    8 14 14 18 11.17
    361 1923Lance Tooth, N.P., Special Steel 5 4 6 14 16 17 5 1/4
    1923 Table 5 1/2 4 6 14 16 17 6
    6 4 1/4 6 3/4 13 15 17 8
  75. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    362 1914 Diamond, special steel, 14 18 4 14 14 18 5
    4 1/2 14 14 18 6.1
    5 14 14 18 6.6
    5 1/2 14 14 18 7.1
    6 14 14 18 7.7
    6 1/2 14 14 18 8.26
    7 14 14 18 8.96
    7 1/2 14 14 18 10.16
    8 14 14 18 11.17
  76. x 18
    Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    363 1914 Tuttle Tooth, diamond point, special steel, 14 4 14 14 18 5
    4 1/2 14 14 18 6.1
    5 14 14 18 6.6
    5 1/2 14 14 18 7.1
    6 14 14 18 7.7
    6 1/2 14 14 18 8.26
    7 14 14 18 8.96
    7 1/2 14 14 18 10.16
    8 14 14 18 11.17
    363 1923Tuttle Tooth, Dia. Point, Special Steel 5 6 6 1/4 14 16 17 5 1/2
    1923 Table 5 1/2 4 6 14 16 17 6 1/4
    6 4 1/4 6 3/4 13 15 17 8 1/4
  77. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width Raker Gullet Raker Width Tooth Gullet Tooth Width Weight
    379 1914 Hollow Back Tuttle, Special Steel 4 3 1/4 1 7/8 7/8 15/16 3.57
    4 1/2 3 1/4 1 7/8 7/8 15/16 3.04
    5 3 1/4 1 7/8 7/8 15/16 3.40
    5 1/2 3 1/4 1 7/8 7/8 15/16 3.74
    6 3 1/4 1 7/8 7/8 15/16 4
    6 1/2 3 1/4 1 7/8 7/8 15/16 7.27
    7 3 1/4 1 7/8 7/8 15/16 4.80
    7 1/2 3 1/4 1 7/8 7/8 15/16 4.90
    8 3 1/4 1 7/8 7/8 15/16 5.60
    379 1950 Hollow Back Tuttle 5 3 1/2 3 1/2 3 1/2 14 14 14
    5 1/2 3 3/4 3 1/2 3 1/2 14 14 14
    6 4 1/4 3 1/2 3 1/2 14 14 14
  78. Two Man Cross Cut Saws
    No Catalog Name Length feet Width Raker Gullet Raker Width Tooth Gullet Tooth Width Weight
    380 1914 Hollow Back Tuttle, Special Steel, 13 gauge 4 3 3/4 1 7/8 7/8 15/16 3.56
    4 1/2 3 3/4 1 7/8 7/8 15/16 4.07
    5 3 3/4 1 7/8 7/8 15/16 4.73
    5 1/2 3 3/4 1 7/8 7/8 15/16 5.50
    6 3 3/4 1 7/8 7/8 15/16 5.61
    6 1/2 3 3/4 1 7/8 7/8 15/16 5.90
    7 3 3/4 1 7/8 7/8 15/16 6.21
    7 1/2 3 3/4 1 7/8 7/8 15/16 7
    8 3 3/4 1 7/8 7/8 15/16 8
  79. Two Man Cross Cut Saws
    No Catalog Name Length feet Width Raker Gullet Raker Width Tooth Gullet Tooth Width Weight
    381 1914 Hollow Back Tuttle, Special Steel, 14 x 16 gauges 4 3 3/4 1 7/8 7/8 15/16 3.56
    4 1/2 3 3/4 1 7/8 7/8 15/16 4.07
    5 3 3/4 1 7/8 7/8 15/16 4.73
    5 1/2 3 3/4 1 7/8 7/8 15/16 5.50
    6 3 3/4 1 7/8 7/8 15/16 5.61
    6 1/2 3 3/4 1 7/8 7/8 15/16 5.90
    7 3 3/4 1 7/8 7/8 15/16 6.21
    7 1/2 3 3/4 1 7/8 7/8 15/16 7
    8 3 3/4 1 7/8 7/8 15/16 8
  80. Two Man Cross Cut Saws
    No Catalog Name Length feet Width Raker Gullet Raker Width Tooth Gullet Tooth Width Weight
    384 1914 Hollow Back Diamond, Special Steel 4 3 1/4 1 1/4 7/8 1 1/4 1 1/8 2.57
    4 1/2 3 1/4 1 1/4 7/8 1 1/4 1 1/8 3.04
    5 3 1/4 1 1/4 7/8 1 1/4 1 1/8 3.40
    5 1/2 3 1/4 1 1/4 7/8 1 1/4 1 1/8 3.74
    6 3 1/4 1 1/4 7/8 1 1/4 1 1/8 4
    6 1/2 3 1/4 1 1/4 7/8 1 1/4 1 1/8 4.27
    7 3 1/4 1 1/4 7/8 1 1/4 1 1/8 4.80
    7 1/2 3 1/4 1 1/4 7/8 1 1/4 1 1/8 4.90
    8 3 1/4 1 1/4 7/8 1 1/4 1 1/8 5.60
  81. Two Man Cross Cut Saws
    No Catalog Name Length feet Width Raker Gullet Raker Width Tooth Gullet Tooth Width Weight
    385 1914 Hollow Back American Tooth, Special Steel 4 3 1/4 1 1/8 1/2 5/8 5/8 2.57
    4 1/2 3 1/4 1 1/8 1/2 5/8 5/8 3.04
    5 3 1/4 1 1/8 1/2 5/8 5/8 3.40
    5 1/2 3 1/4 1 1/8 1/2 5/8 5/8 3.74
    6 3 1/4 1 1/8 1/2 5/8 5/8 4
    6 1/2 3 1/4 1 1/8 1/2 5/8 5/8 4.27
    7 3 1/4 1 1/8 1/2 5/8 5/8 4.80
    7 1/2 3 1/4 1 1/8 1/2 5/8 5/8 4.90
    8 3 1/4 1 1/8 1/2 5/8 5/8 5.60
  82. Two Man Cross Cut Saws
    No Catalog Name Length feet Width Raker Gullet Raker Width Tooth Gullet Tooth Width Weight
    386 1914 Hollow Back Victor, Lance Tooth, Special Steel 4 3 1/4 1 5/16 9/16 1 5/16 3/8 2.57
    4 1/2 3 1/4 1 5/16 9/16 1 5/16 3/8 3.04
    5 3 1/4 1 5/16 9/16 1 5/16 3/8 3.40
    5 1/2 3 1/4 1 5/16 9/16 1 5/16 3/8 3.74
    6 3 1/4 1 5/16 9/16 1 5/16 3/8 4
    6 1/2 3 1/4 1 5/16 9/16 1 5/16 3/8 4.27
    7 3 1/4 1 5/16 9/16 1 5/16 3/8 4.80
    7 1/2 3 1/4 1 5/16 9/16 1 5/16 3/8 4.90
    8 3 1/4 1 5/16 9/16 1 5/16 3/8 5.60
    386 1950 Hollow Back Victor Lance 5 3 1/2 3 1/2 14 14 14 3 1/2
    5 1/2 3 1/2 3 1/2 14 14 14 3 3/4
  83. Two Man Cross Cut Saws
    No Catalog Name Length feet Width Raker Gullet Raker Width Tooth Gullet Tooth Width Weight
    387 1914 Hollow Back Victor, Lance Tooth 14 gauge, Special Steel 4 3 3/4 1 5/16 13/16 1 5/16 5/32 3.85
    4 1/2 3 3/4 1 5/16 13/16 1 5/16 5/32 4.07
    5 3 3/4 1 5/16 13/16 1 5/16 5/32 4.73
    5 1/2 3 3/4 1 5/16 13/16 1 5/16 5/32 5.50
    6 3 3/4 1 5/16 13/16 1 5/16 5/32 5.61
    6 1/2 3 3/4 1 5/16 13/16 1 5/16 5/32 5.90
    7 3 3/4 1 5/16 13/16 1 5/16 5/32 6.21
    7 1/2 3 3/4 1 5/16 13/16 1 5/16 5/32 7
    8 3 3/4 1 5/16 13/16 1 5/16 5/32 8
  84. Two Man Cross Cut Saws
    No Catalog Name Length feet Width Raker Gullet Raker Width Tooth Gullet Tooth Width Weight
    388 1914 Hollow Back Victor, Lance Tooth 14 4 3 3/4 1 5/16 13/16 1 5/16 5/32 3.85
    4 1/2 3 3/4 1 5/16 13/16 1 5/16 5/32 4.07
    5 3 3/4 1 5/16 13/16 1 5/16 5/32 4.73
    5 1/2 3 3/4 1 5/16 13/16 1 5/16 5/32 5.50
    6 3 3/4 1 5/16 13/16 1 5/16 5/32 5.61
    6 1/2 3 3/4 1 5/16 13/16 1 5/16 5/32 5.90
    7 3 3/4 1 5/16 13/16 1 5/16 5/32 6.21
    7 1/2 3 3/4 1 5/16 13/16 1 5/16 5/32 7
    8 3 3/4 1 5/16 13/16 1 5/16 5/32 8
    388 1950 Hollow Back Forester 5 3 1/16 3 3/4 14 15 16 3 3/4
    5 1/2 3 1/16 3 3/4 14 15 16 4 1/4
    6 3 1/16 3 3/4 14 15 16 4 3/4
  85. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    389 1914 Cedar King 2 1/2 1.45
    3 1.99
    3 1/2 2.53
    4 3.85
    4 1/2 4.55
    5 5.25
    5 1/2 8
    6 7.40
    389 1950 Cedar King 3 2 3/8 6 1/2 15 19 17 2 7/8
    3 1/2 2 5/8 6 3/4 15 19 17 3 1/4
    4 2 7/8 7 15 19 17 4 1/2
  86. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    390 1914 Tuttle 2 1/2
    Tuttle 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
    390 1950 Tuttle 3 2 1/4 6 3/4 16 18 2 7/8
    3 1/2 2 1/4 7 16 18 3 1/4
    4 2 3/4 7 1/4 16 18 4 1/2
    4 1/2 2 3/4 7 1/2 15 17 5 1/2
  87. 3
    One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    391 1914 Diamond 2 1/2
    Diamond 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  88. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    392 1914 Victor 2 1/2
    Victor 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
    392 1950 Victor 3 2 1/4 6 3/4 16 18 2 7/8
    3 1/2 2 1/4 7 16 18 3 1/2
    4 2 3/4 7 1/4 16 18 4 1/2
    4 1/2 2 3/4 7 1/2 15 17 5 1/2
  89. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    393 1914 American 2 1/2
    American 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  90. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    395 1914 American Skew Back 2 1/2
    American Skew Back 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  91. One Man Cross Cut Saws
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    397 1950 Common 3 2 1/2 6 1/2 16 18 2 7/8
    3 1/2 2 7/8 6 3/4 16 18 3 1/4
    4 2 7/8 7 16 18 4 1/2
    4 1/2 2 7/8 7 1/4 15 17 5 1/4
  92. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    399 1914 Matchless 2 1/2 1.45
    3 1.99
    3 1/2 2.53
    4 3.85
    4 1/2 4.55
    5 5.25
    5 1/2 8
    6 7.40
  93. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    490 1914 Sheffield 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  94. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    491 1914 Sheffield 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  95. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    493 1914 Sheffield 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  96. Pacific Coast Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    501 1950 Pacific Coast Pondosa 6 3 1/8 5 3/4 14 16 18 5 1/4
  97. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    511 1923Tasmanian F.G., Silver Steel 5 3 3/4 6 1/4 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 18 5 1/4
    6 3 1/2 7 14 16 18 7 1/4
  98. Two Man Cross Cut Saws, Segment Ground
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    518 1914 Silver Steel 4 14 17 20 4
    4 1/2 14 17 20 4.20
    5 14 17 20 4.46
    5 1/2 14 17 20 5
    6 14 17 20 6.60
    6 1/2 14 17 20 5.85
    7 14 17 20 6.15
    7 1/2 14 17 20 6.30
    8 14 17 20 6.50
    518 1923 ---- 5 15 16 20 3 1/4 5 3/4 4 1/2
    1923 Table 5 1/2 15 16 20 3 1/4 5 3/4 5
    6 14 16 20 3 1/4 6 6 1/4
  99. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    540 1914 Silver Steel Rex 4 14 17 20 3.50
    4 1/2 14 17 20 4
    5 14 17 20 4.60
    5 1/2 14 17 20 5.89
    6 14 17 20 6.8
    6 1/2 14 17 20 7.63
    7 14 17 20 8.04
    7 1/2 14 17 20 9.43
    8 14 17 20 10.15
    540 1923 ----, Silver Steel 5 3 1/8 6 3/8 15 16 20 5
    1923 Table 5 1/2 3 1/8 6 3/8 15 16 20 5 1/2
    6 3 1/8 7 14 16 20 7
    540 1950 Two Cutter 5 1/2 3 1/8 6 3/8 14 16 20 5 1/2
    6 3 1/8 7 14 16 20 6 3/4
  100. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    542 1923 ----, Silver Steel 5 4 6 3/4 14 16 19 7 1/4
    1923 Table 5 1/2 4 7 3/8 14 16 19 8
    6 4 6 7/8 14 19 16 8 3/4
  101. <<<
    Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    550 1950 Two Cutter 5 1/2 3 1/8 5 1/2 14 17 19 5 1/2
    6 3 1/8 5 3/4 14 17 19 6 3/4
    550 1923 ---- 5 3 1/8 5 1/4 14 16 19 4 1/2
    1923 Table 5 1/2 3 1/8 5 1/2 14 16 19 5 1/4
    6 3 1/8 5 3/4 14 16 19 6
  102. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    551 1923 ----, Silver Steel 5 3 1/8 6 3/8 15 16 20 5
    1923 Table 5 1/2 3 1/8 6 3/8 15 16 20 5 1/2
    6 3 1/8 7 14 16 20 7
  103. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    552 1923 ----, Silver Steel 5 3 1/8 6 3/8 15 16 20 4 3/4
    1923 Table 5 1/2 3 1/8 6 3/8 15 16 20 5 1/4
    6 3 1/8 7 14 16 20 7
  104. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    553 1923 ---- 5 3 1/8 5 1/4 14 16 19 4 1/4
    1923 Table 5 1/2 3 1/8 5 1/2 14 16 19 5
    6 3 1/8 5 3/4 14 16 19 5 3/4
    553 1950 Perfection 5 1/2 3 1/8 5 1/2 14 17 18 5
    6 3 1/8 5 3/4 14 17 19 5 3/4
    6 1/2 3 1/8 6 5/8 14 17 19 6 3/4
    7 3 1/8 7 1/8 14 17 19 7 1/4
  105. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    556 1923 ----, Pacific Coast Pattern 5 3 1/8 5 1/4 14 16 19 4 1/4
    1923 Table 5 1/2 3 1/8 5 1/2 14 16 19 5 1/2
    6 3 1/8 5 3/4 14 16 19 5 3/4
    556 1950 Pacific Coast Perfection 6 3 1/8 5 3/4 14 16 18 6 1/4
  106. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    605 1914 Dexter, Special Steel, 13 X 17 4 13 13 17 2.88
    4 1/2 13 13 17 3.24
    5 13 13 17 3.60
    5 1/2 13 13 17 3.96
    6 13 13 17 4.32
    6 1/2 13 13 17 4.68
    7 13 13 17 5.94
    7 1/2 13 13 17 5.40
    8 13 13 17 5.76
  107. Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    611 1923 Tasmanian F.G., Special Steel 5 3 3/4 6 1/4 15 16 18 4 3/4
    1923 Table 5 1/2 3 1/4 6 1/2 15 16 18 5 1/4
    6 3 1/2 7 14 16 18 7 1/4
  108. One Man Cross Cut Saws, Taper Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    654 1950 Chippawa 3 2 3/8 6 1/2 15 19 17 2 7/8
    3 1/2 2 5/8 6 3/4 15 19 17 3 1/4
    4 2 7/8 7 15 19 17 4 1/2
  109. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    703 1914 Special Steel, Lance Tooth perforated, 13 X 17 4 13 13 17 2.88
    4 1/2 13 13 17 3.24
    5 13 13 17 3.60
    5 1/2 13 13 17 3.96
    6 13 13 17 4.32
    6 1/2 13 13 17 4.68
    7 13 13 17 5.94
    7 1/2 13 13 17 5.40
    8 13 13 17 5.73
  110. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    704 1914 Lance Tooth, not perforated, special steel, 13 X 17 4 13 13 17 5
    4 1/2 13 13 17 6.1
    5 13 13 17 6.6
    5 1/2 13 13 17 7.1
    6 13 13 17 7.7
    6 1/2 13 13 17 8.26
    7 13 13 17 8.96
    7 1/2 13 13 17 10.16
    8 13 13 17 11.17
  111. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    706 1914 Diamond, special steel, 13 X 17 4 13 13 17 5
    4 1/2 13 13 17 6.1
    5 13 13 17 6.6
    5 1/2 13 13 17 7.1
    6 13 13 17 7.7
    6 1/2 13 13 17 8.26
    7 13 13 17 8.96
    7 1/2 13 13 17 10.16
    8 13 13 17 11.17
  112. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    707 1914 Tuttle Tooth, diamond point, special steel, 13 X 15 4 13 13 15 5
    4 1/2 13 13 15 6.1
    5 13 13 15 6.6
    5 1/2 13 13 15 7.1
    6 13 13 15 7.7
    6 1/2 13 13 15 8.26
    7 13 13 15 8.96
    7 1/2 13 13 15 10.16
    8 13 13 15 11.17
  113. Pacific Coast Pattern, Two Man Cross Cut Saws
    No Catalog Name Length feet Width at Ends inches Width at Center inches Gauge Tooth Edge Gauge at Ends Gauge Back at Center Weight
    708 1914 Tuttle Tooth, diamond point, special steel, 13 X 17 4 13 13 17 5
    4 1/2 13 13 17 6.1
    5 13 13 17 6.6
    5 1/2 13 13 17 7.1
    6 13 13 17 7.7
    6 1/2 13 13 17 8.26
    7 13 13 17 8.96
    7 1/2 13 13 17 10.16
    8 13 13 17 11.17
  114. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    741 1914 Tamarack 3 4
    3 1/2 4 1/2
    4 5 1/2
    4 1/2 6 1/4
    5 7
    5 1/2 8
    6 8 3/4
  115. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    389 1914 Cedar King 2 1/2 1.45
    3 1.99
    3 1/2 2.53
    4 3.85
    4 1/2 4.55
    5 5.25
    5 1/2 8
    6 7.40
    389 1950 Cedar King 3 2 3/8 6 1/2 15 19 17 2 7/8
    3 1/2 2 5/8 6 3/4 15 19 17 3 1/4
    4 2 7/8 7 15 19 17 4 1/2
  116. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    390 1914 Tuttle 2 1/2
    Tuttle 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
    390 1950 Tuttle 3 2 1/4 6 3/4 16 18 2 7/8
    3 1/2 2 1/4 7 16 18 3 1/4
    4 2 3/4 7 1/4 16 18 4 1/2
    4 1/2 2 3/4 7 1/2 15 17 5 1/2
  117. 3
    One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    391 1914 Diamond 2 1/2
    Diamond 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  118. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    392 1914 Victor 2 1/2
    Victor 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
    392 1950 Victor 3 2 1/4 6 3/4 16 18 2 7/8
    3 1/2 2 1/4 7 16 18 3 1/2
    4 2 3/4 7 1/4 16 18 4 1/2
    4 1/2 2 3/4 7 1/2 15 17 5 1/2
  119. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    393 1914 American 2 1/2
    American 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  120. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    395 1914 American Skew Back 2 1/2
    American Skew Back 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  121. One Man Cross Cut Saws
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    397 1950 Common 3 2 1/2 6 1/2 16 18 2 7/8
    3 1/2 2 7/8 6 3/4 16 18 3 1/4
    4 2 7/8 7 16 18 4 1/2
    4 1/2 2 7/8 7 1/4 15 17 5 1/4
  122. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    399 1914 Matchless 2 1/2 1.45
    3 1.99
    3 1/2 2.53
    4 3.85
    4 1/2 4.55
    5 5.25
    5 1/2 8
    6 7.40
  123. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    490 1914 Sheffield 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  124. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    491 1914 Sheffield 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  125. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    493 1914 Sheffield 3 2.42
    3 1/2 2.87
    4 3.51
    4 1/2 4.33
    5 5.13
    5 1/2 5.95
    6 7
  126. One Man Cross Cut Saws, Taper Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    654 1950 Chippawa 3 2 3/8 6 1/2 15 19 17 2 7/8
    3 1/2 2 5/8 6 3/4 15 19 17 3 1/4
    4 2 7/8 7 15 19 17 4 1/2
  127. One Man Cross Cut Saws, Flat Ground
    No Catalog Name Length feet Width at Point inches Width at Butt inches Gauge Tooth Edge Gauge at Center Gauge at Ends Weight
    741 1914 Tamarack 3 4
    3 1/2 4 1/2
    4 5 1/2
    4 1/2 6 1/4
    5 7
    5 1/2 8
    6 8 3/4